Condition monitor with display and an integrated gateway
Product description:
The COMTRAXX® CP9…-I series features a condition monitor with web interface and a display, which is available in different sizes. All Bender devices can be connected via the integrated interfaces. In addition, third-party devices can also be integrated into the system. The measured values, parameters and all other data can be checked and parameterised via the web interface or the display. There is a wide range of options for indicating and visualising alarms. Due to the robust surface and design, there are no limits to the application scenarios.
• Monitoring and parameter setting of all Bender products that support communication
• Mounting in the control cabinet door so that all information is immediately visible
• Commissioning and diagnosis of Bender systems
• Remote diagnosis and remote maintenance
• Control stations in all areas
• Monitoring and analysis of data centres
• Display size 7" and 15.6" with tempered and anti-reflective glass
• Easy to clean and disinfect, degree of protection IP54
• Screwless mounted front plate
• Condition monitor for Bender systems
• Integrated modular gateway between
Bender systems and TCP/IP
• Remote access via LAN, WAN or Internet
• Support of devices that are connected to
the internal BMS bus, via BCOM, Modbus RTU or Modbus TCP • Individual visualisation can be generated,
which can be viewed via the web browser or on the display
• Silent due to operation without fan
• High-quality representation with excellent
contrast, high resolution and a wide viewing angle • Possibility of graphical integration of
building plans or status display in photo quality
• Visual and acoustic notification in the event of an alarm
Scope of functions (V4.5.0 and higher):
• Condition monitor with web interface and display
• Interfaces for the integration of devices
– Internal BMS bus (max. 150 devices)
– BCOM (max. 255 devices)
– Modbus RTU and Modbus TCP (max. 247 devices each)
• Selectable display content
– System overview with all devices, measured values, parameters and alarms
– Individually configurable visualisation
• Ethernet interface with 10/100 Mbit/s for remote access via LAN, WAN or Internet
• Time synchronisation for all assigned devices
• History memory (20,000 entries)
• Data loggers, freely configurable (30 x 10,000 entries)
• Assignment of individual texts for devices, channels (measuring points) and alarms
• Device failure monitoring
• E-mail notification to different users in case of alarms and system errors
• Device documentation* can be created for any device in the system
• System documentation can be created. It documents all devices in the system at once
• Reading the latest measured values, status and alarms messages from all assigned
devices. Uniform access to all assigned devices via Modbus TCP over integrated server.
• Reading the latest measured values, status and alarm messages from all assigned
devices via internal BMS. Uniform access to all assigned devices via Modbus RTU.
• Control commands: From an external application (e.g. visualisation
software or PLC),
commands can be sent to BMS devices via Modbus TCP or Modbus RTU
• Access to alarms and measured values via SNMP (V1, V2c or V3).
SNMP traps are supported.
• Access via PROFINET to alarms and measured values
• Fast and easy parameter setting of all devices assigned to the gateway via web browser or display
• Device backups can be created and restored for all devices in the system
• Quick and easy-to-create visualisation of the system. Integrated
editor provides access to a variety of widgets and functions.
– Display on up to 50 overview pages, where e.g. room plans
can be stored. It is possible to navigate within these pages
– Access to all measured values that are available in the system
– Buttons and sliders can be used to send BMS test and reset
commands, as well as to control external devices via Modbus TCP
• 100 virtual devices with 16 channels each can be created.
There, for example, calculations of several measured values can
be carried out and the result can be used in the system as a new measured value
• 1,600 data points from third-party devices (via Modbus RTU or
Modbus TCP) can be integrated into the system
* Contains all parameters and measured values belonging to the device, as well as
device information such as serial number and software version.
